Ink & Toner Information Website

Brother Printer Cartridge

The refilling of this cartridge is messy therefore it is advised that gloves should be worn and the place where refilling is done should be covered with a newspaper or some other absorbent material.

The following steps can guide you to an easy refill of your brother printer cartridges. The different models have little variations in the procedures other remaining the same.

Brother printer cartridge LC01C, LC01Y, LC01M and LC01BK (MFC 7000 series)

1. Place any absorbent material like a towel underneath before refilling the brother ink cartridges.

2. After filling ink in the syringe bottle remove the needle and put the cone shaped adaptor on it.

3. Find the hole in the cartridge through which the ink flows out and turn the exit port down facing your lap.

4. Slowly inject the ink from the syringe bottle into the cartridge until the ink starts coming out of the vent hole and is not foamy.

5. Now turn the cartridge the other way round so that the vent hole faces you and the exit port is towards your lap.

6. Put the needle back into the syringe bottle and inject the needle into the vent hole. Continue injecting till the ink comes out of the exit hole and stops foaming.

7. Leave the cartridge in this position for about ten minutes. Then repeat the 6th step and let it rest for another ten minutes.

8. Install the cartridge in the printer. If it has to be transported then an electrical tape can be used to cover the exit and vent holes but must be removed before printing.

Brother printer cartridge for Brother MFC-7150 and MFC-7160

There is a sponge inside the cartridge which makes the refilling procedure sticky. The first step remains the same.

1. Locate the exit hole at the bottom where there is a large plug.

2. Also locate the vent hole at the bottom which exists on the same side as the large handle on the top of the cartridge.

3. Turning the exit port towards the lap place the vent hole to the right and vice versa. Seal the exit port with a black electrical tape.

4. Take out the handle on the top of the cartridge. Inside you will see two metallic seals, the smaller one round and the larger one rectangular. Either remove the seals or make holes in them.

5. To fill the syringe bottle with ink squeeze the syringe bottle and the needle be inserted into the ink bottle. Relax the grip and let the syringe suck the ink into the bottle.

6. Taking the syringe bottle slowly inject the ink into the sponge deeply through the rectangular hole till the sponge saturates.

7. Also inject ink in the round hole till the outer chamber is full. After injection seal the round hole with black electrical tape carefully. Also seal the rectangular hole with tape.

8. Put the plastic handle back on the top. Take the cartridge to a sink and remove the tape from the bottom. Let the extra ink drops flow out.

9. Printer should be installed now.

Brother printer cartridge LC41C, LC41Y, LC41M, and LC41BK

In this model the ink is retained because of the valve. The first step is the same.

1. Find the label saying LC41 with the letters such as C, M, Y or BK representing colors.

2. Holding the label side up, on the right side find a window towards the top of the cartridge. Make a hole in the window with a smoldering iron or some heated metal thing.

3. Fill the syringe bottle like step 5 mentioned above.

4. Inject the ink slowly with the syringe bottle into the window on top right of the cartridge. Fill the entire cartridge.

5. Seal the window with black electrical tape.

6. Install in the printer.

Brother printer cartridge HJ100 and HJ400

There is very difference in this cartridge. The first step remains the same.

1. Start with a screw in the vent hole which is opposite to the longest side of the cartridge which is opposite to the print head.

2. Draw the plug out with screw. Fill the syringe bottle half with ink and insert in the hole. Inject slowly and deeply into the sponge.

3. Expect some dripping. Tape the cartridge you have to transport it.

Laser Toner Cartridge

The refilling of a laser toner cartridge is very mush similar to adding petrol or gas to your car. The refilling of toner should be done at a place where there is no breeze. It can burn so work where there is no flame. Also do not inhale it as it is irritating.

The three basic types of laser toner cartridges are:

o Canister: a tube for holding toner

o Drum: a cartridge with gears and a drum which has a gelatin coating

o Toner and developer: similar to drum cartridge but using toner and developer both.

Canister Cartridge

1. Spread some absorbent material like a towel or newspaper. Locate a plug at the end of cartridge.

2. Remove the plug if you find it. If you don’t then create a hole which is away from the paper path (smooth plastic surface).

3. If you create a hole then carefully remove the shavings. 4. Shake the bottle of toner and pour the entire bottle into the cartridge with a funnel or paper funnel.

5. Put the plug back and seal it with a black electrical tape.

6. Install in the printer. The refilling of these cartridges can be done a lot of times.

The last few years saw the release of workgroup type, monochrome laser printers. Now sporting stylish, easy to operate and networking features, these powerhouse printing gadgets have also been programmed to function at zippier speeds and deliver increased yields per gram load of toner powder while producing outputs with enhanced print quality.

In this regard, you’ll be pleased to know that the toner cartridge remanufacturing industry has kept pace with pertinent laser printer innovations. And toner refill products such as the Brother TN 9500 toner refill kit have been configured to meet the performance specifications of the Brother HL 2460 Workgroup Laser Printer and its consumable, the Brother TN-9500 High Capacity Toner/Drum Cartridge. Read from this article the top 3 reasons why you should use the toner refill kit.

#1 The refill toner is more affordable than the OEM toner. Replacing the emptied cartridge with a brand new, high capacity toner cartridge can cost the user as much as $190. Imagine how expensive it would be to do frequent replacements in any given month. But did you know that an emptied cartridge can still be recycled for 2 to 3 cycles of laser printing?

The toner bottle supplied with the Brother TN 9500 toner refill kit contains the same gram load as the OEM high capacity toner cartridge but is priced 86% lower. Now that is equivalent to $151 savings when the user opts to refill the used cartridge instead of buying a new OEM cartridge. Say an office department returns a monthly, consumable consumption rate of 3 replacement cartridges. Refilling an emptied replacement cartridge twice then can cut down the printer consumable budget by 86% the cost of 2 OEM toner cartridges.

#2 The toner refill kit efficiently handles multiple print jobs. Think the use of a toner refill kit can affect the yield performance of the HL 2460 laser printer? Think again! The refill toner supplied with the kit has been manufactured with the right particle dimension and composition to meet the performance specifications set for the laser printer. Now that only makes the toner refill product primed for high printing speeds of as much as 24 ppm (pages per minute) and for yields of up to 11,000 pages at a coverage of 5%.

#3 Print quality is not sacrificed despite the cost. Low cost does not necessarily imply inferior print quality. Thus, Brother TN 9500 toner refill kit users need not worry on its print output. With producers adhering to strict quality control standards in the manufacture of its high grade toner powder, users are assured of the right print consistency every time. Much like the quality delivered by OEM toner cartridges, users enjoy sharp monochrome texts, smooth grays and solid graphics printouts that are reminiscent of the laser printer’s resolution potential of 2400 x 600 dpi (dots per inch).

In the end, it is right to say that the Brother TN 9500 toner refill kit meets head on with the powerful print engine of the HL 2460 to satisfy the high volume, networked and multiple print jobs necessitated in a fast paced working environment – at rock bottom prices!

Chemically figured to suit your printer our Brother TN2000 compatible toner cartridges are guaranteed to achieve a fantastic finish without paying for fancy packaging. All our products have been vigorously tested to ensure compatibility with your printer. Toners4less believe that just because the packaging looks good doesn’t mean that the toner is superior. Brothers aren’t the only company that knows how to make toner cartridges!

You don’t have to compromise on printing quality or pay a fortune for your Brother TN2000 toner cartridges. Toners4less sell toner cartridges compatible with your Brother TN2000 printer from manufacturers that you can trust at a price far less than OEM toner cartridges! Your printing needn’t be expensive just because you want reliable toner cartridges. Don’t go down the high street in search of the product you need. You don’t even need to leave your home to buy your Brother TN2000 toner cartridges. Start saving money today, be adventurous, and be a part of the best kept secret in the printing industry. Professional printing results does not have to expensive!

Our Brother TN2000 toner cartridges are totally new and not recycled. They have not been tampered with and are sealed and in its original packaging. Brother toner cartridges for your HL2030 printer at Toners4less cost only approximately 40% of the price of genuine Brother TN2000 toner cartridges. We also offer a no-quibble money back guarantee so if you’re not satisfied with your Brother TN2000 toner cartridges we will offer you a replacement or full refund.

If you want to start saving money today then look no further than Toners4less. We don’t want you to have to wait for your items so we make sure that your orders are despatched quickly and efficiently maintaining a speedy service all year round. When you’ve forgotten to get a spare for when that all important ink runs out, we know how urgent it is you get another one! Toners4Less offers the best products at enviable prices with a speedy service that won’t keep you waiting. Order your ink cartridges at Toners4less today to start saving money.

In spite of the fact that a Brother printer costs lesser than other brands and has a remarkably fast printing speed, there are numerous problems associated with this printer. The top few problems which a Brother printer is notorious for are its unreliability, short life, printing errors and paper jams. Certain printer models produced by Brother have seen to last only a few months, say two or three months.

Very often a paper is jammed in the mid way. Dealing with the paper jams is next to impossible. If one tries to remove it, it often results in the breaking of fuser. Not all, but certain specific models produced by Brother have proved to be of very poor quality. They even feel extremely light, flimsy and sub standard. Getting the machine replaced with another piece results in the same flaws.

A very common problem with nearly all the models of Brother printer is that they produce irritating noise during their operation and during the cooling phase. These sounds are unbearable for some people. They take extraordinarily long durations to warm up and cause voltage to drop by substantial amounts. Most of the prints produced by a Brother printer are faulty, leading to the wastage of paper and ink. Prints are usually dull, and are in no way comparable to the lab quality.

The Brother toner employed in Brother laser printer is very costly and is consumed too quickly. A brother laser printer is only good enough for printing text, but not images. It is absolutely useless for graphics, pictures, heavy stock and envelopes. The physical parts of the printer like its top cover are not strong enough. It is known for giving rise to electrical problems and blows ones circuit breaker quite often.

A brother printer produces curled, twisted and warped papers. It does not align the paper automatically. One has to take great care while inserting the paper so that it is properly aligned. More than often, the roller leaves ugly marks, spots and shadows on the paper, making it unworthy of professional use.

Brother technical support is not very helpful for people trying to have their faulty machine work, fixed or exchanged. The user manual, too, does not contain adequate information to guide the users. Often, the design is so defective that the tray size does not match with that of a standard A4 size sheet and the cartridge is too hard to be taken out. The printer does not carry a cable when purchased. A Brother printer never lasts more than a year. The type of problem depends on the model. Some models have been found to be much more problematic and troublesome as compared to others.

Although printing has become ever increasingly necessary, so has the need to print documents with a professional quality. Also important is that our printing is met with as few errors as possible and as much haste as a printer can facilitate. For that you need a product that has been specially formulated to work in unison with your printer, working together to provide you with a quality product.

With their years of being reputed to be the leader in providing printers and toner across a wide range of industries, and also for home use, Brother are sure to be able to meet your printing needs. From the lab to the office their toners have been specially formulated to offer you an excellent result when working together with your Brother printer.

Original Brother toner boasts the following advantages when compared with cheaper alternatives;
They guarantee maximum performance with excellent results.
A robust ink delivery system that is sure to stay sharp every time even after demanding print jobs.
They will not damage your printer or performance output like cheaper alternatives can.
They are specifically designed to work with your printer thereby encouraging maximum performance and output.
Developed to provide high quality resolution, grey scale and block color.

Brother supplies enhance Toner particle size, shape and color pigmentation in order to increase clarity and decrease the graininess of the printed image.
Original Brother Consumables guarantee an even flow and toner distribution on the paper.
Higher levels of customer support satisfaction.
Brother Green ethos takes care of the environment by offering a Brother cartridge and toner collection programme.
Using original Brother Toner ensures you have the most technologically up-to-date product necessary for maximum quality output.

If you’re looking for excellent professional results with a reliable product than look no further than Brother toner, specially designed to work with your printer.